Tech2Win is the Tech2 emulator software for GM diagnostics. It allows you to use your J2534 pass thru as a Tech2 on GM vehicles. The following instructions will walk you through downloading and setting up Tech2Win.
A minimum of 2 GB of RAM is required to run GDS 2. Download and installation time is dependent upon the internet bandwidth available during the download process. The GDS 2 application needs to be loaded on each shop PC individually. Once the initial application installation is complete, GDS 2 will run in either a standalone mode when launched from the PC desktop icon or from TIS2Web.
1.PC must be started in Admin mode.2.Enter the TIS2Web application. Click \"Continue\".3.A software version screen will be displayed. Click \"OK\".4.Select GDS 2 from the TIS2Web home page GDS 2.5.Select \"Start GDS 2\" from the \"BEFORE YOU START SCREEN\" screen.6.A pop-up window will appear with an update data bar. The GDS 2 installation may go through several steps.
Once GDS 2 is installed, select the appropriate language and Click \"OK\". The main application screen will be displayed. A GDS 2 Shortcut icon will now also be displayed on your desktop. GDS 2 Software Version and GM Global Version will appear at the bottom left hand corner of the screen.
You must install the Diagnostic Package prior to using the application. If a Diagnostic Package is not installed, a \"No Diagnostic packages installed in application\" message appears on the GDS 2 main menu.
During the installation from TIS2Web, approximately 50 MB of data is downloaded via the internet. Depending on your computer's security, your firewall may require reconfiguration to perform TIS2Web functions. The described update processes require that the PC is running always in Admin mode, To run GDS 2 using an MDI module, both GDS 2 and the MDI module must have the most recent software versions downloaded.
GM MDI Diagnosis Software installed 2.5' SATA HDD, you can run on Lenovo ThinkPad, T61, T400, T410, T420 and T430, X61, X200, X201, X220, X230, Other models (Intel chipset can compatible, almost all the laptop as I3 I5 / I7 series), you also can find these second-hand bran computer on our website.
As far as I know, it only works on windows xp, i have had a few problems in work with this device, try turning of your anti virus and firewall,as once its installed you can cannect to it through your wireless network so its getting blocked by your fiewall because its trying to connect to the internet,we think.We done this in work and it worked.
I bought a new laptop to use in work which came with windows 7 preinstalled, I looked into doing a dual boot with windows xp but it looked alittle complicated, the easiest option was to install vmware and have windows xp installed in that.
uninstall mdi manger from control panel, reboot, reinstall mdi manager , start mdi manger make sure correct firmware, close mdi manager or update firmware or do a recovery accordingly, Now leave mdi connected with 12v supply and reinstall tech2win, right click tech2win shortcut and click button -> open file location, find emulator.exe ,right click and select option to run as administrator.
Windows XP O/SHard disk: 500GB100M RAM1.2GHz PentiumA vehicle communication interface (GM MDI scanner) must be installed and connected to PC.PC/laptop with sufficient power supply
You can check the Tech2Win activity between vehicle, MDI, Tech2Win and the PC on the button of the software program screen marked red picture below.If you need to refer more detail installation information, please check TIS2Web News and select the Tech2Win Quick Reference Guide.
Uninstall GDS2 and GDS2 Java from Handle -panel, and implement GDS2AutoInstall.éxe (this install aIl immediately) (i utilized GDS2AutoInstall.éxe from another version of GDS2 created in the net) then, install VX Manager 1.5.0.0428, (before operate GDS2 from desktop computer, open up VXmanager, go to diagnostics, my apps, after that install GM GDS2testosterone levels2w,) connect the VXDiag and launch the shorcut positioned in the desktop computer GDS2.